Life-fitness G5 CABLE MOTION Bedienungsanleitung

G5 CABLE MOTION™ GYM SYSTEMUSER GUIDEWARNING:Read and follow all directions for each step to insure proper assembly of this product.CLASS HPART # 8289

10STEP 4: Remove one QUICK CONNECT from the end of one UPPER (LONG) CABLE (43). Insert the end (where the QUICK CONNECT was removed) of the UPPER (L

11STEP 5: Dissemble the QUICK CONNECT (37) by removing the two M5 HEX SCREWS (H) from the QUICK CONNECTCOUPLER (D). Carefuly remove the COMPRESSION S

12STEP 6: Mount the RIGHT BOTTOM PLATE (13) and the LEFT BOTTOM PLATE (30) to the FRONT UPRIGHT (1) using two10-32 x 3/4” PHILLIPS PAN HEAD SCREWS (6

13STEP 7:  Remove one QUICK CONNECT from the end of one LOWER (SHORT) CABLE (44). Insert the end (where the QUICK CONNECT was removed) of the the LO

14STEP 8: Attach the BACK THIGH HOLD CLAMP (50) to the the MAIN UPRIGHT (1) by using two M6 x 60mm SCREWS (69)and two 1/4” WASHERS (70) from the back

15STEP 9: Attach the TOP FRONT COVER (17) to the TOP BACK COVER (16) using eight M4 ZINC PHILLIPS PAN HEADSCREWS (72). DO NOT OVERTIGHTEN SCREWS INTO

16STEP 10: Insert the ball end of one GUIDE CABLE (42) through the eye hook on one FLOATING PULLEY ASSEMBLY (11).Insert and hook the ball end of the

17STEP 11: Assemble the MOUNTING BRACKET (9) to the top of the FRONT UPRIGHT (1) using two M10 x 20mm SCREWS(66) and two 3/8” WASHERS (57). Tighten s

18STEP 12: Referencing step 5, at the UPPER SWIVEL PULLEYS (25) push back on the QUICK CONNECT SLEEVE (F) at theend of each cable and attach the SHOR

19MAINTENANCEPlease note:* We recommend cleaning your product (pads and frame) on a regular basis, usingwarm soapy water. Touch-up paint can be purcha

2TABLE OF CONTENTSSafety Statement . . . . . . . . . . . . . . . .2 Assembly Instructions . . . . . . . . . . . . . .7Gym Dimensions. . . . . . . .

20LIMITED WARRANTYLife Fitness® G5 Cable Motion™ Gym SystemLife Fitness extends the following LIMITED WARRANTY to the original owner (proof of purchas

LIFE FITNESS5100 NORTH RIVER ROAD.SCHILLER PARK, IL 60176 U.S.A.Tel: 1.847.288.3300 Fax: 1.800.216.88931.800.351.3737 (Toll-free within the U.S. an

3GYM DIMENSIONS Resistance Ratio: 1:2Machine Weight: 500 pounds

4COMPONENTS LISTITEM NO. QTY. PART NO. DESCRIPTION1 1 8188301 FRONT UPRIGHT ASSEMBLY2 1 8210501 FOOT PLATE WITH MATS ASSEMBLY4 1 8349801 RIGHT UPRIGHT

5COMPONENTS LISTHARDWARE ITEM NO. QTY. PART NO. DESCRIPTION57 14 3102514 3/8” WASHER58 4 3256203 M10 X 30MM SCREW59 8 3256211 M10 X 70MM SCREW60 4 324

6HARDWARE:M10 HEX TENSION SCREW (#63)M10 NYLOCK NUT (#71)3/8” WASHER (#57)1/2” WASHER (#61)M10 X 30MM SCREW (#58)M6 x 60MM SCREW (#69)1/4” WASHER (#70

7STEP 1: Slide the RIGHT SUPPORT LEG (55) over the MOUNTING TUBE (A) of the RIGHT UPRIGHT (4). Loosely securethe RIGHT SUPPORT LEG (55) and RIGHT UPR

8STEP 2: LOOSELY attach the FOOTPLATE (2) to the RIGHT SUPPORT LEG (55) and LEFT SUPPORT LEG (56) using fourM10 x 70mm SCREWS (59) and four FLAT 3/8”

9STEP 3: Positon two WEIGHT STACK CUSHIONS (23) and GUIDE RODS (22) at the GUIDE ROD BRACKET (B) on the bot-tom of the FRONT UPRIGHT (1).NOTE: MAKE S