Life Fitness Fit-1 Bedienungsanleitung PDF herunterladen (Seite 20)

FIGURE 29

STEP 29:

• SECURELY assemble two 4-1/2” PULLEYS (38) to the BOOM (8) using two BLACK RH CAPS (77), two RH CAPS (78), two

3/8 X 2-3/4” BOLTS (68), four 3/8” SAE WASHERS (75), four 3/8” RH WASHERS (76), four 3/8 X 1/2” FLANGE SPACERS

(54), two 2-7/8 X 2-1/4” CABLE CLIPS (49) and two 3/8” LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 29.

77 BLACK

68 3/8 X 2-3/4” (70m)

• Slide one WEIGHT STACK PIN (33) over the STEM on the HEAD PLATE (29) as shown in FIGURE 29.

• Screw the threaded end of the LAT CABLE (44) all the way onto the end of the STEM on the HEAD PLATE (29) and tighten jam

nut securely. See FIGURE 29.

1/2 1/2 1/2 1/2 1/2 1/2

23456

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Life Fitness Fit-1 Bedienungsanleitung Seite 20